Engine oil additive - Tungsten nanocoating

Product detailed description

Main features

High wear protection - Protects bearings, crankshaft, connecting rods, and other stressed engine parts,
extending their service life.

Reduced friction - Lower mechanical losses contribute to reduced fuel consumption.

Reduced operating costs - Less wear means fewer service interventions and longer maintenance
intervals.

Effects

• Reduction in fuel consumption by 5–15% on average
• Reduction in harmful emissions by 8% or more
• Reduction in the negative effects of cold starts
• Reduced wear (verified by tests conducted by Brno University of Technology and SGS)
• Slight increase in power and torque
• Quieter and smoother engine operation
• Treated sliding surfaces become resistant to corrosion
• Lower friction extends the life of the car battery

What makes the product unique

• It works on a different physical principle, not on a chemical reaction with oil
• Nanotech does not improve or change the properties of engine oil. Its effect consists
  in modifying the surfaces of metal friction areas, where it creates a protective film
        with low friction.
• It is not a chemical additive – there is no risk of corrosion or negative reactions with oil
• The functional component is tungsten nanoparticles, which unfold under pressure
  and shear stress
• The reduction in friction and wear has been confirmed by independent tests conducted
  by SGS and Brno University of Technology

Areas of application

• Passenger cars and vans:
• • LPG and CNG engines; plug-in hybrids
• • Small agricultural, construction and forestry equipment
• • Generators, pumps, compressors and marine engines; forklifts

Principle of operation

The functional component of the product is fullerene-type tungsten nanoparticles (round particles). These particles consist of several dozen layers.

During engine operation, pressure and shear stress cause them to unravel and form a continuous, very smooth, and highly resistant protective film with low friction on sliding surfaces.

The resulting nanocoating:

• reduces friction between metal surfaces
• protects sliding surfaces from wear
• contributes to lower fuel and oil consumption
• extends engine life and smoothes its operation

Recommendations for use:

• Apply when changing the oil, or no later than 2,000 km after changing.
• Not recommended for use in old or contaminated oil.

Instruction for use

1. Heat the package (e.g. in warm water) to approximately 50–60 °C.
2. Shake thoroughly.
3. Pour into a warm engine.
4. Either drive immediately or let the engine run for a few minutes.
5. You should notice the effect after 100–500 km of operation.
6. Nanotech is miscible with synthetic, semi-synthetic and mineral oils.

Packaging and dosage

The volume of the package corresponds to the amount of product in millilitres in relation to the engine oil capacity.

Example:

For an engine with an oil capacity of 4.3 litres, use CPD140 (140 ml), which is intended for oil capacities of up to 4.5 litres.

The safety data sheet is available upon request.

Packing